Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Palm Treo 650 Case Replacement

Neye ihtiyacın var

  1. Palm Treo 650 Case Replacement, Battery and Stylus: adım 1, 1 resimden 1.
    • Position the phone so the screen faces down.

    • Remove the stylus found on the back of the phone.

  2. Palm Treo 650 Case Replacement: adım 2, 1 resimden 1.
    • Hold the button in the middle of the phone's back to remove the battery cover.

    • Slide the cover down to remove it, and set the cover aside.

  3. Palm Treo 650 Case Replacement: adım 3, 2 resimden 1. Palm Treo 650 Case Replacement: adım 3, 2 resimden 2.
    • Lift the edge of the battery, separating contact points, and pull out as pictured.

  4. Palm Treo 650 Case Replacement, Case: adım 4, 1 resimden 1.
    • Remove the small round rubber cover on the back of the phone located immediately below the antenna.

    • This will uncover a screw that will be removed in the next step.

  5. Palm Treo 650 Case Replacement: adım 5, 3 resimden 1. Palm Treo 650 Case Replacement: adım 5, 3 resimden 2. Palm Treo 650 Case Replacement: adım 5, 3 resimden 3.
    • Unscrew six black 6.9 mm Torx screws with a T5 Torx Screwdriver.

    • Unscrew one 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver.

    • Pull out the antenna.

  6. Palm Treo 650 Case Replacement: adım 6, 2 resimden 1. Palm Treo 650 Case Replacement: adım 6, 2 resimden 2.
    • Pry the back cover off using a spudger or similar tool.

    • The back cover is attached by several small clips on the inside.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

mmedrano

Üyelik tarihi: 11/15/09

95 İtibar

2 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 19-3, Maness Fall 2009 Cal Poly, Team 19-3, Maness Fall 2009 üyesi

CPSU-MANESS-F09S19G3

4 Üyeler

18 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 3,071