Ana içeriğe geç

Palm Treo 755p Back Cover Replacement

Neye ihtiyacın var

  1. Palm Treo 755p Back Cover Replacement, Battery: adım 1, 3 resimden 1. Palm Treo 755p Back Cover Replacement, Battery: adım 1, 3 resimden 2. Palm Treo 755p Back Cover Replacement, Battery: adım 1, 3 resimden 3.
    • Press the button on the back cover to release the battery cover.

    • Slide off the battery cover.

  2. Palm Treo 755p Back Cover Replacement: adım 2, 2 resimden 1. Palm Treo 755p Back Cover Replacement: adım 2, 2 resimden 2.
    • Remove the battery by lifting up on one side.

  3. Palm Treo 755p Back Cover Replacement, Back Cover: adım 3, 2 resimden 1. Palm Treo 755p Back Cover Replacement, Back Cover: adım 3, 2 resimden 2.
    • Remove the stylus by pulling up on the large top to reveal the top left case screw.

    • Pull away the black flap to reveal the top right case screw.

  4. Palm Treo 755p Back Cover Replacement: adım 4, 1 resimden 1.
    • Use a T5 screwdriver to remove the five 7 mm black/red back case screws.

    • Use a T5 screwdriver to remove the middle 3.1 mm screw.

  5. Palm Treo 755p Back Cover Replacement: adım 5, 2 resimden 1. Palm Treo 755p Back Cover Replacement: adım 5, 2 resimden 2.
    • Use the plastic opening tool to pry open the device. Start on the volume control side (left side of the screen) and work your way up along the edge and across the top.

    • The side volume control buttons may fall out after opening the device.

  6. Palm Treo 755p Back Cover Replacement: adım 6, 2 resimden 1. Palm Treo 755p Back Cover Replacement: adım 6, 2 resimden 2.
    • Slowly unfold the back casing away from the front casing revealing the red and black wound wire speaker cable, marked by the red box.

    • Potential for device damage: Be gentle while separating the halves to prevent breaking the red and black wound wire speaker cable that bridges both halves.

  7. Palm Treo 755p Back Cover Replacement: adım 7, 3 resimden 1. Palm Treo 755p Back Cover Replacement: adım 7, 3 resimden 2. Palm Treo 755p Back Cover Replacement: adım 7, 3 resimden 3.
    • Using tweezers, squeeze the plastic head of the black and red wound wire cable. This will detach the cable from the circuit board and fully separate the two halves.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Mike Shaw

Üyelik tarihi: 01/03/11

601 İtibar

6 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 14-6, Forte Winter 2011 Cal Poly, Team 14-6, Forte Winter 2011 üyesi

CPSU-FORTE-W11S14G6

6 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 1,536