Giriş

Use this guide to replace the battery on a Palm Zire 21.

  1. Remove the two 0.8mm screws located on the back of the device. Remove the two 0.8mm screws located on the back of the device.
    • Remove the two 0.8mm screws located on the back of the device.

  2. Remove the back cover from the device exposing the battery. Remove the back cover from the device exposing the battery. Remove the back cover from the device exposing the battery.
    • Remove the back cover from the device exposing the battery.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Using a plastic opening tool, small flathead screwdriver, or small knife blade pry the battery away from the motherboard. Be careful not to pry to fast, or you could rip the wires off during this stage.
    • Using a plastic opening tool, small flathead screwdriver, or small knife blade pry the battery away from the motherboard. Be careful not to pry to fast, or you could rip the wires off during this stage.

  5. Carefully remove the battery from the motherboard.
    • Carefully remove the battery from the motherboard.

  6. Unwrap the old battery from electrical tape and replace with new battery.
    • Unwrap the old battery from electrical tape and replace with new battery.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jeremy Craft

Üyelik tarihi: 26-09-2014

301 İtibar

3 adet Kılavuz yazıldı

Takım

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 796