Ana içeriğe geç

Giriş

Use this guide to replace a screen on a Palm Zire 21

  1. Remove the two 0.8mm screws located on the back of the device. Remove the two 0.8mm screws located on the back of the device.
    • Remove the two 0.8mm screws located on the back of the device.

  2.   Using tweezers, or something similar flip up the tab, releasing the wires located under the flap   Using tweezers, or something similar flip up the tab, releasing the wires located under the flap   Using tweezers, or something similar flip up the tab, releasing the wires located under the flap
    •  Using tweezers, or something similar flip up the tab, releasing the wires located under the flap

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Using a Philips head screwdriver, remove the two screws located at the bottom of the board. Using a Philips head screwdriver, remove the two screws located at the bottom of the board.
    • Using a Philips head screwdriver, remove the two screws located at the bottom of the board.

  5. Gently, remove the motherboard by lifting up exposing the screen. Gently, remove the motherboard by lifting up exposing the screen.
    • Gently, remove the motherboard by lifting up exposing the screen.

  6. Carefully, remove the screen from the device by lifting up and replacing with a new one. Carefully, remove the screen from the device by lifting up and replacing with a new one.
    • Carefully, remove the screen from the device by lifting up and replacing with a new one.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Jeremy Craft

Üyelik tarihi: 26-09-2014

301 İtibar

3 adet Kılavuz yazıldı

Takım

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 201