Ana içeriğe geç

Palm m 100 Cover Replacement

Neye ihtiyacın var

  1. Palm m 100 Cover Replacement, Cover: adım 1, 1 resimden 1.
    • Remove the batteries.

  2. Palm m 100 Cover Replacement: adım 2, 1 resimden 1.
    • Using a Torx 5 screwdriver, remove the four screws located on the rear cover of the device by turning counterclockwise. Set aside screws.

  3. Palm m 100 Cover Replacement: adım 3, 3 resimden 1. Palm m 100 Cover Replacement: adım 3, 3 resimden 2. Palm m 100 Cover Replacement: adım 3, 3 resimden 3.
    • Remove rear cover by gently lifting it up from the bottom. To remove the front cover, flip the device over, and then separate the screen/circuit board from the cover.

  4. Palm m 100 Cover Replacement: adım 4, 1 resimden 1.
    • Set aside broken cover, and replace with a new cover.

  5. Palm m 100 Cover Replacement: adım 5, 1 resimden 1.
    • Close again like a book, and lay it gently into the front panel. Make sure the screen is facing outwards of the front panel.

  6. Palm m 100 Cover Replacement: adım 6, 1 resimden 1.
    • Put the back cover on the device and screw the four screws, screwing in a clockwise direction. Take caution not to over-tighten the screws.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Anne Carey

Üyelik tarihi: 10/25/11

1 İtibar

3 adet Kılavuz yazıldı

Ekip

James Madison, Team 1-3, Allen Fall 2011 James Madison, Team 1-3, Allen Fall 2011 üyesi

JMU-ALLEN-F11S1G3

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 537