Giriş

This guide will provide instructions and visuals on how to replace the display screen.

Parçalar

Hiçbir parçaya gerek yok.

Remove the batteries.
  • Remove the batteries.

Yorum Ekle

Using a Torx 5 screwdriver, remove the four screws located on the rear cover of the device by turning counterclockwise. Set aside screws.
  • Using a Torx 5 screwdriver, remove the four screws located on the rear cover of the device by turning counterclockwise. Set aside screws.

Yorum Ekle

  • Remove rear cover by gently lifting it up from the bottom.

Yorum Ekle

  • Carefully lift up the circuit board, which will also lift up the screen. Do so carefully to prevent breaking the connectors.

Yorum Ekle

  • Lift the left side of the circuit board and open it as though it were a book.

Yorum Ekle

  • Unplug the three connectors located on the right side of the circuit board with great caution and care. Do not pull by the cable, and be sure to pull the connector itself gently.

Yorum Ekle

  • After separating the screen from the board, set aside the old display screen.

Yorum Ekle

  • Replace with a new display screen.

Yorum Ekle

  • Plug in the three connectors.

Yorum Ekle

  • Close again like a book, and lay it gently into the front panel, screen facing outwards of the front panel.

Yorum Ekle

  • Put the back cover on the device and screw the four screws, screwing in a clockwise direction. Take caution not to over-tighten the screws.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Lexi Gallucci

Üyelik tarihi: 18-10-2011

11 İtibar

2 adet Kılavuz yazıldı

Takım

James Madison, Team 1-3, Allen Fall 2011 James Madison, Team 1-3, Allen Fall 2011 üyesi

JMU-ALLEN-F11S1G3

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 493