Ana içeriğe geç

Palm m105 Batteries Replacement

  1. Palm m105 Batteries Replacement, Batteries: adım 1, 1 resimden 1.
    • Press the latch on the battery door on the back of the device and pull outwards.

    • Back the device up if possible, you may lose all your data if there is no power for a little too long for it to retain it, make sure this is done quickly.

  2. Palm m105 Batteries Replacement: adım 2, 1 resimden 1.
    • Install two AAA alkaline batteries into the battery compartment, placing the positive and negative ends of the battery in the correct positions. (Shown as a diagram inside the battery compartment)

    • Make sure to remove one battery at a time and replace with fresh battery. This will retain information on the device.

  3. Palm m105 Batteries Replacement: adım 3, 1 resimden 1.
    • Place the battery door back into place on the back of the device; it will make a 'click' sound when properly reattached.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Erik Thompson

Üyelik tarihi: 10/04/11

31 İtibar

5 adet Kılavuz yazıldı

Ekip

UW Stout, Team 1-3, Zhou Fall 2011 UW Stout, Team 1-3, Zhou Fall 2011 üyesi

UWSTOUT-ZHOU-F11S1G3

4 Üyeler

7 adet Kılavuz yazıldı

Bir Yorum

"Moderate difficulty"?? There's only three steps and two of them involve removing and reinstalling the battery door.

Gene Merritt - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 7

Her zaman: 1,222