Ana içeriğe geç

Palm m105 Motherboard Replacement

Neye ihtiyacın var

  1. Palm m105 Motherboard Replacement, Motherboard: adım 1, 1 resimden 1.
    • Start with your intact Palm m105.

  2. Palm m105 Motherboard Replacement: adım 2, 1 resimden 1.
    • Remove protective flap by pulling directly out from the top.

    • The two clips will pop out

  3. Palm m105 Motherboard Replacement: adım 3, 1 resimden 1.
    • Remove Faceplate. There is a tab where the finger is located in the picture that needs to be pulled up.

    • The Faceplate will then easily lift off

  4. Palm m105 Motherboard Replacement: adım 4, 2 resimden 1. Palm m105 Motherboard Replacement: adım 4, 2 resimden 2.
    • Using a T5 Torx bit screwdriver, remove the four screws located on the back of the device turning counter clockwise.

    • The link to purchase this screwdriver is Located here.

  5. Palm m105 Motherboard Replacement: adım 5, 1 resimden 1.
    • This is what the device looks like once you have taken the screws out and opened the device.

  6. Palm m105 Motherboard Replacement: adım 6, 1 resimden 1.
    • The Motherboard and screen will pop out of the back case easily.

    • Be careful when doing this step, the components are fragile.

  7. Palm m105 Motherboard Replacement: adım 7, 1 resimden 1.
    • To remove the screen from the motherboard there are going to be three tabs that need to pulled up.

    • ** This step needs to be done with special care because it is very fragile.**

    • Once they are all three popped up the motherboard and screen will separate easily.

  8. Palm m105 Motherboard Replacement: adım 8, 1 resimden 1.
Sonuç

To reassemble your device, follow these instructions in reverse order.

Aaron

Üyelik tarihi: 10/04/11

7 İtibar

1 Kılavuz yazıldı

Ekip

UW Stout, Team 1-3, Zhou Fall 2011 UW Stout, Team 1-3, Zhou Fall 2011 üyesi

UWSTOUT-ZHOU-F11S1G3

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 6

Her zaman: 1,051