Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the three screws running along the back edge of case cover. Then, remove the two screws from each side of case cover.
    • Remove the three screws running along the back edge of case cover.

    • Then, remove the two screws from each side of case cover.

  2. Grab edges of cover. Pull outward, slightly, then straight up.
    • Grab edges of cover. Pull outward, slightly, then straight up.

  3. Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player. Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player.
    • Lift up the five tabs securing the front panel to the chassis. There are three on the bottom, and two on the inside edges of the panel. Panel should then lift off the player.

  4. Grip jogger dial and lift up. It should come off easily. Grip jogger dial and lift up. It should come off easily.
    • Grip jogger dial and lift up. It should come off easily.

  5. Remove 4 mounting screws as shown. Unscrew and save brass tab. Push in 2 plastic retainers and lift out.
    • Remove 4 mounting screws as shown.

    • Unscrew and save brass tab.

    • Push in 2 plastic retainers and lift out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Kevin

Üyelik tarihi: 26-04-2011

354 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 18-20, Garner Spring 2011 Cal Poly, Team 18-20, Garner Spring 2011 üyesi

CPSU-GARNER-S11S18G20

4 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 2,108