Eşyalarını Tamir Et Topluluk Mağaza

Panasonic Lumix DMC-TZ5 button board Replacement

Neye ihtiyacın var

  1. Panasonic Lumix DMC-TZ5 button board Replacement, Back Cover: adım 1, 1 resimden 1.

    • Remove the battery and memory card from the device.

    Düzenle

  2. Panasonic Lumix DMC-TZ5 button board Replacement: adım 2, 1 resimden 1.

    • Remove 4 screws from the right side of the camera.

    • There are two 3.4mm screws at the top.

    • There are two 2.2mm screws at the bottom.

    Düzenle

  3. Panasonic Lumix DMC-TZ5 button board Replacement: adım 3, 1 resimden 1.

    • Remove the single 3.4mm screw on the left side of the camera.

    Düzenle

  4. Panasonic Lumix DMC-TZ5 button board Replacement: adım 4, 1 resimden 1.

    • Remove 5 screws from the base of the camera.

    • There are two 2.2mm screws next to the battery compartment.

    • There are three 4mm screws around the tripod mount.

    Düzenle

  6. Panasonic Lumix DMC-TZ5 button board Replacement: adım 5, 1 resimden 1.

    • Slowly slide the back cover away from the device

    • The back casing is held in place by two ribbon cables. Do not pull the back cover too far from the camera.

    Düzenle

  7. Panasonic Lumix DMC-TZ5 button board Replacement: adım 6, 2 resimden 1. Panasonic Lumix DMC-TZ5 button board Replacement: adım 6, 2 resimden 2.

    • Detach both ribbon cables using a spudger.

    • Use the tip of the spudger to lift the black clip upward, unlocking the ribbon cable.

    Düzenle

  8. Panasonic Lumix DMC-TZ5 button board Replacement: adım 7, 1 resimden 1.

    • Remove the back casing from the camera.

    Düzenle

  9. Panasonic Lumix DMC-TZ5 button board Replacement, button board: adım 8, 2 resimden 1. Panasonic Lumix DMC-TZ5 button board Replacement, button board: adım 8, 2 resimden 2.

    • Use the spudger to remove the ribbon cable connecting the lens casing to the circuit board by lifting up the black clip.

    • Carefully remove the function switch cover. This unit snaps on and off.

    Düzenle

  10. Panasonic Lumix DMC-TZ5 button board Replacement: adım 9, 1 resimden 1.

    • Carefully unsnap the front logic board from the rear logic board using a spudger.

    Düzenle

  11. Panasonic Lumix DMC-TZ5 button board Replacement: adım 10, 2 resimden 1. Panasonic Lumix DMC-TZ5 button board Replacement: adım 10, 2 resimden 2.

    • Slide the entire top part of the camera that is attached to the logic board, horizontally away from the camera.

    Düzenle

  12. Panasonic Lumix DMC-TZ5 button board Replacement: adım 11, 3 resimden 1. Panasonic Lumix DMC-TZ5 button board Replacement: adım 11, 3 resimden 2. Panasonic Lumix DMC-TZ5 button board Replacement: adım 11, 3 resimden 3.

    • Remove the ribbon cable from the top connection panel by unlocking the black clip with a spudger.

    • This leaves you with the logic board and the top connection panel separate and free from the camera

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Ben Canfield

Üyelik tarihi: 10/10/10

409 İtibar

3 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

Ekip

Cal Poly, Team 9-21, Regan Fall 2010 Cal Poly, Team 9-21, Regan Fall 2010 üyesi

CPSU-REGAN-F10S9G21

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 5,595