Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

Step by step guide to replacing your damaged LCD Display

Aletler

Hiçbir alet belirtilmedi.

Parçalar

  1. Remove the battery and memory card from the unit Remove 6 (0.3mm) screws from the sides of the unit Remove 5 (0.3mm) screws from the bottom of the unit
    • Remove the battery and memory card from the unit

    • Remove 6 (0.3mm) screws from the sides of the unit

    • Remove 5 (0.3mm) screws from the bottom of the unit

  2. Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al

    Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al
  3. Lift up slightly the rear cover. Do not remove rear cover yet. It is still attached to the Main PCB.
    • Lift up slightly the rear cover.

    • Do not remove rear cover yet. It is still attached to the Main PCB.

    • Flip up the cable clamps using a spudger or other device. Careful not to break the clamps. Release flex cables and remove back cover.

  4. Release the 3 metal clips from the rear cover and remove the LCD Release the 3 metal clips from the rear cover and remove the LCD Release the 3 metal clips from the rear cover and remove the LCD
    • Release the 3 metal clips from the rear cover and remove the LCD

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sales Cameraparts4you

Üyelik tarihi: 01-07-2016

2.715 İtibar

20 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 197