Skip to main content

Giriş

Use this guide to replace the foam hull of the Parrot AR.Drone 2.0.

AR.Drone 2.0 spare parts and mounting tools are available from several Parrot retailers.

Parçalar

Hiçbir parça belirtilmedi.

Videoya Genel Bakış

  1. Peel off double sided tape and apply to one side of the broken hull. Peel off double sided tape and apply to one side of the broken hull.
    • Peel off double sided tape and apply to one side of the broken hull.

  2. Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın
  3. Cut the tape with scissors as close to the shape of the broken hull as possible. Cut the tape with scissors as close to the shape of the broken hull as possible.
    • Cut the tape with scissors as close to the shape of the broken hull as possible.

  4. Peel off the other side of the tape and stick the two sides together. Peel off the other side of the tape and stick the two sides together.
    • Peel off the other side of the tape and stick the two sides together.

Sonuç

To reassemble your device, follow these instructions in reverse order.

David Hoyt

Üyelik tarihi: 09-04-2010

3.765 Reputation

43 adet Kılavuz yazıldı

Team

Cal Poly, Team 25-89, Amido Spring 2010 Cal Poly, Team 25-89, Amido Spring 2010 üyesi

CPSU-AMIDO-S10S25G89

4 Üyeler

52 adet Kılavuz yazıldı

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 7

All Time: 1,258