Giriş

Use this guide to replace, propellers, shafts, and gears on a Parrot AR.Drone 2.0.

AR.Drone 2.0 spare parts and mounting tools are available from several Parrot retailers.

Parçalar

Hiçbir parçaya gerek yok.

Videoya Genel Bakış

  1. Remove the foam body.
    • Remove the foam body.

    Yorum Ekle

  2. Disconnect the battery by pulling the two red wires apart.
    • Disconnect the battery by pulling the two red wires apart.

    • Remove the battery by releasing the battery retaining straps.

    how do i put the clips back in?

    kuki vier - Yanıt

    Are you referring to the clips in step three? If so, i highly recommend a hard, flat edged tool like a plastic spudger or flat head screw driver. Push is against the opposite side of the C clip that is opened with roughly the same force you applied to get it off. You have to be really careful that you push it directly horizontal or else you might damage the shaft or risk loosing the clip if it pops off.

    David Hoyt -

    • Remove the small retaining clip using a plastic opening tool.

    • Be careful as these clips can fly off and can be difficult to find.

    Yorum Ekle

    • The propeller, gear, and rod can be removed by simply lifting them off the motor.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 başka kişi bu kılavuzu tamamladı.

David Hoyt

Üyelik tarihi: 09-04-2010

3.630 İtibar

43 adet Kılavuz yazıldı

Takım

Cal Poly, Team 25-89, Amido Spring 2010 Cal Poly, Team 25-89, Amido Spring 2010 üyesi

CPSU-AMIDO-S10S25G89

4 Üyeler

52 adet Kılavuz yazıldı

Bir Yorum

any idea how to change the little gear?

Dar BS - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 16

Son 30 Gün: 76

Her zaman: 5,350