Giriş

Use this guide to replace a broken propeller on your Parrot Bebop.

You will need the Bebop propeller removal tool. Be sure to place the propellors on the proper engines. Propellers with central holes fit over the engines with a central screw. Flat propellers fit on flat engines. Propellers with central screws should be diagonally opposite each other, and propellers without holes should be diagonally opposite each other.

Video Talimatları

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

David Hoyt

Üyelik tarihi: 09-04-2010

3.596 İtibar

44 adet Kılavuz yazıldı

Takım

Cal Poly, Team 25-89, Amido Spring 2010 Cal Poly, Team 25-89, Amido Spring 2010 üyesi

CPSU-AMIDO-S10S25G89

4 Üyeler

52 adet Kılavuz yazıldı

Bir Yorum

Dear Sir I do not have any money buy an expensive drone so I bought a Ttr003 hornet, and on the first flight it caught in a tree and stripped the small drive gear, I have tried to get in touch with the manufacturer, with no success and spares seem to be nonexistent, the shaft is only 1mm Itried to find a metal drive with 12teeth and a 1mm shaft. I would be happy if you could suggest something , possibly throwing it out the window or a solution.

Yours MAX

email maxm643@gmail.com

max - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 13

Son 30 Gün: 59

Tüm Zamanlar: 6,983