Ana içeriğe geç

Patch your Patagonia Nano Puff ® Jacket with Repair Tape

Neye ihtiyacın var

  1. Patch your Patagonia Nano Puff ® Jacket with Repair Tape, Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 1, 1 resimden 1.
    • Inspect the damage on your jacket. Clip any dangling threads or fabric using small scissors.

  2. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 2, 3 resimden 1. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 2, 3 resimden 2. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 2, 3 resimden 3.
    • Grab your repair tape.

    • Flip the repair tape to the back side.

    • Using a permanent marker, draw an oval slightly larger than the hole.

    • If you have a wide hole, you can use a rectangle, but be sure to round the edges. Rounding the edges prevents the corners from getting caught and peeling up.

  3. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 3, 2 resimden 1. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 3, 2 resimden 2.
    • Cut out your shape using scissors.

  4. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 4, 3 resimden 1. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 4, 3 resimden 2. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 4, 3 resimden 3.
    • Using your fingernail, or a pin, peel the backing off the tenacious tape, so that you only have the clear sticky layer.

    • Be sure not to touch the sticky side of the tape as this will gum up the tape and it won’t stick well.

  5. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 5, 2 resimden 1. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 5, 2 resimden 2.
    • Lay the tape over the hole and press the tape down with your finger.

  6. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 6, 2 resimden 1. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: adım 6, 2 resimden 2.
    • Use a fingernail or spudger to work out all of the air bubbles under the tape. Continue rubbing the tape until it is well-adhered.

Bitiş Çizgisi

9 farklı kişi bu kılavuzu tamamladı.

Brittany McCrigler

Üyelik tarihi: 03/05/12

88.898 İtibar

131 adet Kılavuz yazıldı

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

16.560 adet Kılavuz yazıldı

2 Yorum

I followed this tutorial and used Tenacious tape by Gear Aid because it claims to not leave a residue behind if removed. That was a bad idea. I am now ready to upgrade this patch to a sewn one and removing the tape is absolutely leaving behind a residue. Really annoyed right now.

Ling Wang - Yanıt

This is really helpful, thanks.

James

James Riley - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 31

Son 30 gün: 191

Her zaman: 45,147