Giriş
Follow the procedure outlined in this guide to remove and install the circuit board for the device's bottom buttons.
Neye ihtiyacın var
-
-
Pry off the four white feet with the pointed end of the spudger
-
-
-
-
Unscrew the ten 6 mm Phillips #00 screws holding the board in place.
-
Neredeyse bitti!
To reassemble your device, follow these instructions in reverse order.
Sonuç
To reassemble your device, follow these instructions in reverse order.
Bir Yorum
My philips dc 320 /37 A do not sown time digits and frecvency digits . Where can I find schematic diagram?
Thank you