Giriş

The audio video ports on the DVD player can become unresponsive over time. This guide will show you how to replace the audio video ports on your DVD player.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.
    • Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

    • Remove the 6.4 mm Phillips #1 screws on each side of the device.

  2. Remove the top plate of the DVD by firmly grasping the player on both sides.
    • Remove the top plate of the DVD by firmly grasping the player on both sides.

    • Shift the top plate towards the backside of the player.

    • Lift the back half of the top plate up to remove it from the player.

    • Unplug the one ribbon wire and the five bundled cable connectors that are plugged into the motherboard.

    • Remove the three 4.76 mm #1 Phillips head screws located on the back of the DVD player.

    • Remove the two 7.94 mm #1 Phillips head screws from the motherboard.

    • Remove the motherboard from the DVD player.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Dyllon Phuong

Üyelik tarihi: 31-08-2018

447 İtibar

3 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 24

Her zaman: 42