Giriş

Over time, the HDMI port can become unresponsive. This guide will show you how to replace an unresponsive HDMI port on your Philips DVP5992-F7.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.
    • Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

    • Remove the 6.4 mm Phillips #1 screws on each side of the device.

  2. Remove the top plate of the DVD by firmly grasping the player on both sides.
    • Remove the top plate of the DVD by firmly grasping the player on both sides.

    • Shift the top plate towards the backside of the player.

    • Lift the back half of the top plate up to remove it from the player.

    • Unplug the one ribbon wire and the five bundled cable connectors that are plugged into the motherboard.

    • Remove the three 4.76 mm #1 Phillips head screws located on the back of the DVD player.

    • Remove the two 7.94 mm #1 Phillips head screws from the motherboard.

    • Remove the motherboard from the DVD player.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nathan Sarti

Üyelik tarihi: 31-08-2018

253 İtibar

2 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 24

Her zaman: 43