Ana içeriğe geç

Giriş

Use this guide to replace the front light in your speaker.

Parçalar

Hiçbir parça belirtilmedi.

  1. Before continuing, be sure your device is powered off.
    • Before continuing, be sure your device is powered off.

    • Remove two 9mm Phillips #0 head screws from the bottom side of the speaker.

  2. Peel back the rubber feet from either side of the base.
    • Peel back the rubber feet from either side of the base.

  3. Remove four 9mm Phillips #0 head screws from the bottom of the speaker.
    • Remove four 9mm Phillips #0 head screws from the bottom of the speaker.

  4. Separate the base of the speaker from the upper housing.
    • Separate the base of the speaker from the upper housing.

  5. Remove four 9mm Phillips #0 head screws from the inside of the speaker case.
    • Remove four 9mm Phillips #0 head screws from the inside of the speaker case.

  6. Remove all cable connectors from the speaker motherboard. Remove all cable connectors from the speaker motherboard. Remove all cable connectors from the speaker motherboard.
    • Remove all cable connectors from the speaker motherboard.

  7. Remove four Phillips #0 head screws from the front panel.
    • Remove four Phillips #0 head screws from the front panel.

  8. Using the tip of your finger, gently separate the front panel display from its mount.
    • Using the tip of your finger, gently separate the front panel display from its mount.

  9. Remove the front panel display.
    • Remove the front panel display.

Sonuç

To reassemble your device, follow these instructions in reverse order.

David Lennon

Üyelik tarihi: 14-04-2015

9.518 İtibar

10 adet Kılavuz yazıldı

Takım

Cal Poly, Team 4-5, Maness Spring 2015 Cal Poly, Team 4-5, Maness Spring 2015 üyesi

CPSU-MANESS-S15S4G5

4 Üyeler

28 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 202