Eşyalarını Tamir Et Topluluk Mağaza

Photive Rain Speaker Replacement

Giriş

Does the audio coming from your device sound rough? Does your device not emit any audio and you've ruled out the battery or the volume as the cause? Then the speaker may be the problem. This guide goes through the steps necessary to remove the speaker from your Photive Rain device so you can replace the speaker.

Neye ihtiyacın var

  1. Photive Rain Speaker Replacement, Back Panel: adım 1, 1 resimden 1.

    • Turn the speaker off before disassembling.

    • Remove the suction cup from its groove by twisting and turning it.

    Düzenle

  2. Photive Rain Speaker Replacement: adım 2, 1 resimden 1.

    • Remove the four 8.5 mm screws from the back panel of the speaker by using the Phillips #1 Screwdriver.

    • Remove back panel

    Düzenle

  4. Photive Rain Speaker Replacement, Speaker: adım 3, 1 resimden 1.

    • Carefully remove the front panel from the device.

    Düzenle

  5. Photive Rain Speaker Replacement: adım 4, 1 resimden 1.

    • Detach the connector clips from the motherboard using the iFixit Opening Tool.

    • Some force may be necessary to remove the plastic clips.

    Düzenle

  6. Photive Rain Speaker Replacement: adım 5, 2 resimden 1. Photive Rain Speaker Replacement: adım 5, 2 resimden 2.

    • After the speaker is detached, remove the two 8.5mm screws that hold the speaker to the front panel with a Phillips #1 screwdriver.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

8 tane daha katılımcı ile

abcdef ghijk

Üyelik tarihi: 02/15/16

723 İtibar

4 adet Kılavuz yazıldı

Rozetler: 14

+11 tane daha rozet

Ekip

IUPUI, Team 1-4, Harley Spring 2016 IUPUI, Team 1-4, Harley Spring 2016 üyesi

IUPUI-HARLEY-S16S1G4

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 6

Her zaman: 296