Giriş

Faulty deck buttons can cause the user unable to control the radio receiver. This guide will show you how to replace the deck buttons for the Pioneer FH-X730BS.

Parçalar

Hiçbir parçaya gerek yok.

  1. Apply pressure to the tabs on each side using the plastic opening tool. You will need to pull the face away from the frame while unhooking the tabs. You will need to pull the face away from the frame while unhooking the tabs.
    • Apply pressure to the tabs on each side using the plastic opening tool.

    • You will need to pull the face away from the frame while unhooking the tabs.

  2. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  3. After removing the stereo face from the frame it should look similar to this. Remove the seven 11.2mm Phillips #1 screws on the rear side of the stereo face. Remove the seven 11.2mm Phillips #1 screws on the rear side of the stereo face.
    • After removing the stereo face from the frame it should look similar to this.

    • Remove the seven 11.2mm Phillips #1 screws on the rear side of the stereo face.

  4. Remove the volume knob by pulling it towards you and pull the motherboard out of the face. The audio buttons can now be taken out. You can flip the face downwards and tap the audio buttons. You can now insert the replacement audio buttons into the face.
    • Remove the volume knob by pulling it towards you and pull the motherboard out of the face.

    • The audio buttons can now be taken out. You can flip the face downwards and tap the audio buttons.

    • You can now insert the replacement audio buttons into the face.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Cody Pesta

Üyelik tarihi: 17-09-2018

667 İtibar

6 adet Kılavuz yazıldı

Takım

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 2

Son 30 Gün: 4

Her zaman: 39