Pioneer MXT-X366BT Metal Case Replacement

Giriş

This guide shows how to replace the metal sleeve on the Pioneer MXT-X366BT. This guide can act as a prerequisite for replacing the internal components of the radio, although the metal sleeve is also available as a replacement part.

Note: The radio must be removed from the vehicle for this guide. If the radio is currently installed in the vehicle, removal may require special assistance.

Neye ihtiyacın var

Adım 1 Metal Casing

Pioneer MXT-X366BT Metal Case Replacement, Metal Casing: adım 1, 2 resimden 1.

Pioneer MXT-X366BT Metal Case Replacement, Metal Casing: adım 1, 2 resimden 2.

Apply small amount of pressure inward with a plastic opening tool to release bottom clip.
Pry the top clip with the plastic opening tool to release it.
The head unit is symmetrical and has the same amount of clips on the other side.

Düzenle

Adım 2

Remove the face plate holder.

Düzenle

Adım 3

Remove the six 5mm Phillips-head screws with Philips #2 screwdriver.

Düzenle

Adım 4

Remove the inner three 5mm Phillips head screws, with a Phillips #2 screwdriver, attached to the metal backing.
Remove the metal backing that is now free.

Düzenle