Eşyalarını Tamir Et Topluluk Mağaza

Pioneer Steel Wheels Folding Hinges Replacement

Giriş

This guide will show you the steps to remove the folding hinges at the bast of the headband.

Neye ihtiyacın var

  1. Pioneer Steel Wheels Folding Hinges Replacement, Headband: adım 1, 2 resimden 1. Pioneer Steel Wheels Folding Hinges Replacement, Headband: adım 1, 2 resimden 2.

    • Remove the two screws on the underside of the headband with the PH0 Phillips screw driver.

    Düzenle

  2. Pioneer Steel Wheels Folding Hinges Replacement: adım 2, 2 resimden 1. Pioneer Steel Wheels Folding Hinges Replacement: adım 2, 2 resimden 2.

    • With the headband fully extended, hold the base of the headband with one hand and with your other hand, hold the top of the headband.

    • With force, pull upwards.

    Düzenle

  3. Pioneer Steel Wheels Folding Hinges Replacement: adım 3, 3 resimden 1. Pioneer Steel Wheels Folding Hinges Replacement: adım 3, 3 resimden 2. Pioneer Steel Wheels Folding Hinges Replacement: adım 3, 3 resimden 3.

    • Remove the rail-piece that is now sticking up by pulling it up and out of the headphone.

    • Repeat on the opposite side and the headband will be released.

    • During reassembly, make the sure the rail-pieces match their respective sides so the headband reinserts properly.

    Düzenle

  5. Pioneer Steel Wheels Folding Hinges Replacement, Folding Hinges: adım 4, 2 resimden 1. Pioneer Steel Wheels Folding Hinges Replacement, Folding Hinges: adım 4, 2 resimden 2.

    • While holding the base of the headband with one hand, hold the ear cup with the other hand.

    • Pull them apart to reveal the screw.

    Düzenle

  6. Pioneer Steel Wheels Folding Hinges Replacement: adım 5, 2 resimden 1. Pioneer Steel Wheels Folding Hinges Replacement: adım 5, 2 resimden 2.

    • While apart, remove the screw from the headphone.

    Düzenle

  7. Pioneer Steel Wheels Folding Hinges Replacement: adım 6, 2 resimden 1. Pioneer Steel Wheels Folding Hinges Replacement: adım 6, 2 resimden 2.

    • Loosen the plastic cover piece that protects the chrome folding hinge.

    • Remove the plastic cover piece.

    • During reassembly, make sure the plastic covering piece hooks onto the base of the chrome hinge before screwing it back in.

    Düzenle

  8. Pioneer Steel Wheels Folding Hinges Replacement: adım 7, 2 resimden 1. Pioneer Steel Wheels Folding Hinges Replacement: adım 7, 2 resimden 2.

    • Holding the ear cup with one hand, pull up on the base of the headband with the other hand to release the folding hinge.

    • Repeat for the opposite side if necessary.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Garrett Leung

Üyelik tarihi: 04/16/13

955 İtibar

8 adet Kılavuz yazıldı

Rozetler: 16

+13 tane daha rozet

Ekip

Cal Poly, Team 10-40, Amido Spring 2013 Cal Poly, Team 10-40, Amido Spring 2013 üyesi

CPSU-AMIDO-S13S10G40

4 Üyeler

37 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 465