Giriş

The base unit and headset are synchronized together when you bought them. So if you want to use a replacement headset with the base unit (or if you lose your connection to the base unit) you will need to follow these steps to synchronize the headset to the base:

Ensure the headset is in the base's cradle.
  • Ensure the headset is in the base's cradle.

Yorum Ekle

Press the volume control buttons on the back of the base until the front of the base flashes red.
  • Press the volume control buttons on the back of the base until the front of the base flashes red.

Yorum Ekle

Press the mute switch on top of the headset until the green light on the headset turns on.
  • Press the mute switch on top of the headset until the green light on the headset turns on.

Yorum Ekle

Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord. Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.
  • Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.

Yorum Ekle

When the flashing red light becomes solid, synchronization is complete.
  • When the flashing red light becomes solid, synchronization is complete.

Yorum Ekle

Bitiş Çizgisi

2 başka kişi bu kılavuzu tamamladı.

Joe

Üyelik tarihi: 12-04-2012

61 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 17-29, Amido Spring 2012 Cal Poly, Team 17-29, Amido Spring 2012 üyesi

CPSU-AMIDO-S12S17G29

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 4

Her zaman: 1,622