Eşyalarını Tamir Et Topluluk Mağaza

PlayStation 2 Slimline SCPH-900xx Power Supply Replacement

Giriş

Follow this guide to replace the power supply on your PlayStation 2 Slimline.

Neye ihtiyacın var

  1. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Lower Smart Plate: adım 1, 1 resimden 1.

    • Turn off your PlayStation 2 and remove the disc and Memory Card.

    • Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

    Çevir

  2. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: adım 2, 1 resimden 1.

    • Locate the six covers.

    • Two are located underneath the feet.

    • One cover is located underneath the Void sticker.

    Çevir

  3. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: adım 3, 1 resimden 1.

    • Remove the Void sticker with a Spudger and some cleaning alcohol

    • Removing the Void sticker will void the warranty of your device!

    • Some versions of that console maybe don’t have the sticker or it’s relocated.

    Çevir

  5. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: adım 4, 2 resimden 1. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: adım 4, 2 resimden 2.

    • Remove the covers by using either a Spudger, Opening Picks or your fingernail.

    Çevir

  6. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: adım 5, 1 resimden 1.

    • Remove the six Phillips #1 screws with a screwdriver.

    • The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

    Çevir

  7. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: adım 6, 2 resimden 1. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: adım 6, 2 resimden 2.

    • Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.

    • Separate the two halves.

    Çevir

  8. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Power Supply: adım 7, 1 resimden 1.

    • Remove the Phillips screw from the power supply.

    Çevir

  9. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: adım 8, 1 resimden 1.

    • Remove the power supply connector from the motherboard.

    • To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.

    Çevir

    • Lift the power supply straight up and out of the PS2.

    Çevir
Sonuç

To reassemble your device, follow the above steps in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Bu çevirmenlere özel teşekkürler:

de en

100%

MrJulian

shingle

Bu çevirmenler dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Yazar

1 tane daha katılımcı ile

MrJulian

Üyelik tarihi: 10/22/20

1.543 İtibar

7 adet Kılavuz yazıldı

Rozetler: 18

+15 tane daha rozet

Bir Yorum

I remember i was open the PS2 for cleaning but when i cleaning the power supply, my sister plugged it than I got an electric shock. 🤣🤣🤣

Memozit - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 14

Son 30 gün: 90

Her zaman: 664