Ana içeriğe geç

PlayStation 3 Motherboard Assembly Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. PlayStation 3 Motherboard Assembly Replacement, Motherboard Assembly: adım 1, 1 resimden 1.
    • Pull the control board ribbon cable straight up and out of its socket on the motherboard.

  2. PlayStation 3 Motherboard Assembly Replacement: adım 2, 2 resimden 1. PlayStation 3 Motherboard Assembly Replacement: adım 2, 2 resimden 2.
    • Remove the two 12 mm Phillips screws securing the control board to the lower case.

    • Remove the control board and its attached cable from the PS3.

  3. PlayStation 3 Motherboard Assembly Replacement: adım 3, 1 resimden 1.
    • Remove the following eight screws securing the motherboard assembly to the lower case:

    • Seven 12 mm Phillips screws (ph2)

    • One 30 mm Phillips screw

  4. PlayStation 3 Motherboard Assembly Replacement: adım 4, 1 resimden 1.
    • Remove the control board bracket.

  5. PlayStation 3 Motherboard Assembly Replacement: adım 5, 2 resimden 1. PlayStation 3 Motherboard Assembly Replacement: adım 5, 2 resimden 2.
    • Use the flat end of a spudger to pry the hard drive bay cover away from the lower case.

    • Remove the hard drive bay cover.

  6. PlayStation 3 Motherboard Assembly Replacement: adım 6, 1 resimden 1.
    • Lift the motherboard assembly out of the lower case.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 2,197