Giriş

If you want to replace the fan or clean the fan system - video tutorial:


Please SUBSCRIBE to my channel ツ

Videoya Genel Bakış

  1. Disconnect the fan cable and remove the nine screws from the bottom side.
    • Disconnect the fan cable and remove the nine screws from the bottom side.

    Yorum Ekle

  2. Remove the two heat sink clamps and bottom shield, then gently separate  the motherboard off the top shield.
    • Remove the two heat sink clamps and bottom shield, then gently separate the motherboard off the top shield.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the four Phillips screws and lift the top shield.

    Yorum Ekle

  4. Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 başka kişi bu kılavuzu tamamladı.

ZFix

Üyelik tarihi: 09-12-2013

160.284 İtibar

304 adet Kılavuz yazıldı

Takım

Master Techs Master Techs üyesi

Community

279 Üyeler

758 adet Kılavuz yazıldı

2 Yorum

Awesome guide. Thank you so much. I did it, but now I just wonder what that white stuff was when I removed the motherboard. I think it's that thermal stuff people have been talking about and I suppose I have to replace that. I also hope that it's the fan that is what's causing my PS3 to say that it's overheating and shut off. I'm so glad you guys posted this. Great job. I rather do it myself than pay Sony an arm and a leg. Cheers!

chetacheez - Yanıt

This is CPU / GPU thermal paste / compound. I recommend you Arctic MX-2, MX-4. It is very good and not expensive.

ZFix -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 24

Son 30 Gün: 97

Her zaman: 7,717