Menü

Ayarlarınız

Tezgahım

Cihazlarınız için kılavuz, parça ve cevaplara hızlı erişim edinin
Sepetim

Sepetiniz boş görünüyor

Mağazamıza Göz Atın

PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement

Yazan: ZFix (ve 5 başka katılımcı)
  • Yorumlar: 0
  • Favoriler: 31
  • Tamamlanma: 12

Zorluk

Kolay

Adımlar

9

Gerekli Süre

40 dakika - 2 saat

Bölümler

1

İşaretler

1

Member-Contributed Guide

Üye Katkılı Kılavuz

Topluluğumuzun müthiş bir üyesi bu kılavuzu hazırladı. Bu kılavuz, iFixit personeli tarafından yönetilmiyor.

Giriş

PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck).


More info about disassembling, you can find in

PlayStation 3 Slim Teardown

Videoya Genel Bakış

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

    Düzenle

  2. Remove Power Supply. Remove Power Supply. Remove Power Supply.

    • Remove Power Supply.

    Düzenle

  3. Separate cables, unscrew the screw and remove the Blu Ray drive. Separate cables, unscrew the screw and remove the Blu Ray drive. Separate cables, unscrew the screw and remove the Blu Ray drive.

    • Separate cables, unscrew the screw and remove the Blu Ray drive.

    Düzenle

  4. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

  5. Disassemble the upper metal shield. Disassemble the upper metal shield. Disassemble the upper metal shield.

    • Disassemble the upper metal shield.

    Düzenle

  6. Remove the two very small phillips screws in each lower corner referenced by the red circles. Remove the two very small phillips screws in each lower corner referenced by the red circles. Remove the two very small phillips screws in each lower corner referenced by the red circles.

    • Remove the two very small phillips screws in each lower corner referenced by the red circles.

    Düzenle

  7. Be careful with flex cables. Be careful with flex cables. Be careful with flex cables.

    • Be careful with flex cables.

    Düzenle

  8. Now you can remove the Laser Deck. Now you can remove the Laser Deck. Now you can remove the Laser Deck.

    • Now you can remove the Laser Deck.

    Düzenle

  9. Transfer two flex cables and 2x rubbers. Transfer two flex cables and 2x rubbers. Transfer two flex cables and 2x rubbers.

    • Transfer two flex cables and 2x rubbers.

    Düzenle

  10. You can test the console before full assembling. You can test the console before full assembling. You can test the console before full assembling.

    • You can test the console before full assembling.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

12 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

ZFix

Üyelik tarihi: 09-12-2013

164.105 İtibar

305 adet Kılavuz yazıldı

Rozetler: 35

+32 tane daha rozet

Takım

Master Techs Master Techs üyesi

Community

286 Üyeler

808 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 22

Son 30 Gün: 107

Her zaman: 16,498