Giriş

You can use this method if you can't eject the stuck disk by the eject button and the eject hole. The PS3 slim on this video is model CECH-300X.

Full video you can see here:

More info about disassembling, you can find in PlayStation 3 Slim Teardown

Videoya Genel Bakış

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

    Yorum Ekle

  2. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.
    • Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.

    Yorum Ekle

    • In this case we have ... 4x disks. :)

    • .

    • Did you do it successfully?

    Yorum Ekle

    • Test the console before assembling. And don't forget to put the spindle disc magnet.

    I did this and turns out my kids had shoved 4 disc in there . Anyway got it working like takes the disc and ejects fine but won’t read the disc and makes a wierd clicking sound . I have filmed it what it does trying to read the disc please help!!! Or is it a lost cause and just buy a new system . I’m a lady not that tech savvy

    Santina Nan - Yanıt

Sonuç

To reassemble your device, follow these instructions in reverse order.

13 başka kişi bu kılavuzu tamamladı.

ZFix

Üyelik tarihi: 09-12-2013

160.116 İtibar

304 adet Kılavuz yazıldı

Takım

Master Techs Master Techs üyesi

Community

279 Üyeler

758 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 47

Son 30 Gün: 244

Her zaman: 11,319