Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

PlayStation 3 Slim Motherboard Assembly Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. PlayStation 3 Slim Motherboard Assembly Replacement, Motherboard Assembly: adım 1, 1 resimden 1.
    • Pull the AC-In cables upward to remove the AC inlet from the lower case.

  2. PlayStation 3 Slim Motherboard Assembly Replacement: adım 2, 2 resimden 1. PlayStation 3 Slim Motherboard Assembly Replacement: adım 2, 2 resimden 2.
    • Use the flat end of a spudger to pry both antenna connectors up from their sockets on the motherboard.

  3. PlayStation 3 Slim Motherboard Assembly Replacement: adım 3, 1 resimden 1.
    • Pull the control board ribbon cable up and out of its socket on the motherboard.

    • Remove the control board.

  4. PlayStation 3 Slim Motherboard Assembly Replacement: adım 4, 1 resimden 1.
    • Turn the PS3 over and lay it on its backside.

    • Use the flat edge of a metal spudger to pop up the small access door on the bottom cover near the front of the PS3.

    • Remove the blue Phillips screw hidden under the access door.

  5. PlayStation 3 Slim Motherboard Assembly Replacement: adım 5, 1 resimden 1.
    • Slide the hard drive bay cover toward the right side of the lower case, then pull it away from the front edge to remove it from the PS3.

  6. PlayStation 3 Slim Motherboard Assembly Replacement: adım 6, 1 resimden 1.
    • Using its attached metal handle, pull the hard drive out of its bay.

  7. PlayStation 3 Slim Motherboard Assembly Replacement: adım 7, 1 resimden 1.
    • Remove the following five screws securing the motherboard assembly to the lower case:

    • Two silver 6 mm Phillips

    • Three black 8 mm Phillips

  8. PlayStation 3 Slim Motherboard Assembly Replacement: adım 8, 1 resimden 1.
    • Lift the motherboard assembly from its front edge and remove it from the lower case, minding the antenna cable still attached to the lower case.

    • Be careful not to bend the metal antenna bodies as you lift the motherboard assembly.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,182