Giriş

This will guide you in replacing the Mother board of a PlayStation One.

Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove all cables plugged into the PlayStation.
    • Remove all cables plugged into the PlayStation.

  2. Flip over the PlayStation and remove the six screws from the bottom.
    • Flip over the PlayStation and remove the six screws from the bottom.

    • Flip the PlayStation back.

    • There are no screws holding EVERYTHING inside the PlayStation so better hold it like a burger while flipping.

    • Lift up and remove the upper case.

    • Disconnect the ribbon cable and wired cable connectors.

    • Take extreme care when disconnecting ribbon cable from motherboard. Tears extremely easy.

    • remove the metal plate

    • remove the mother board by lifting the back.

    • if you're having a hard time removing it, use your nail and lift the second controller port.

Sonuç

To reassemble your device, follow these instructions in reverse order.

12 başka kişi bu kılavuzu tamamladı.

trickster

Üyelik tarihi: 23-12-2013

1.914 İtibar

11 adet Kılavuz yazıldı

Bir Yorum

I think that the GPU in my PS One is going bad (screen flickers green and pink on occasion but it is becoming more frequent). Would replacing the motherboard fix this? That is, is the GPU stored on the motherboard?

Eric Rosenberg - Yanıt

İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 Gün: 25

Son 30 Gün: 94

Her zaman: 4,828