Giriş

This guide takes you through installing a camera on the PlayStation Vita.

  1. Power off and remove the memory card.
    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    Yorum Ekle

  2. Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.
    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    Yorum Ekle

    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    Yorum Ekle

    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    Yorum Ekle

    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    Yorum Ekle

    • Free the battery cable by gently prying up on the connection with a spudger.

    Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

    Jimbo Jones - Yanıt

    This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

    ylimakiminna - Yanıt

    Yea I messed up there too. Is there a way to fix it?

    Alethia Henry - Yanıt

    • Separate the front and rear cases.

    Yorum Ekle

    • Release the camera flex cable socket by prying up on the tab with a spudger. Leave the socket open.

    Yorum Ekle

    • Using a spudger, gently pry up the camera.

    • Work your way under the camera and along the camera flex cable, using the pointy tip of the spudger to peel away the adhesive, freeing the camera.

    • Carefully lift and remove the camera.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 başka kişi bu kılavuzu tamamladı.

Brittany McCrigler

Üyelik tarihi: 05-03-2012

79.908 İtibar

133 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

114 Üyeler

7.038 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 8

Son 30 Gün: 57

Her zaman: 4,815