Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

PlayStation Vita Case Separation

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. PlayStation Vita Case Separation, Case Separation: adım 1, 2 resimden 1. PlayStation Vita Case Separation, Case Separation: adım 1, 2 resimden 2.
    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

  2. PlayStation Vita Case Separation: adım 2, 3 resimden 1. PlayStation Vita Case Separation: adım 2, 3 resimden 2. PlayStation Vita Case Separation: adım 2, 3 resimden 3.
    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

  3. PlayStation Vita Case Separation: adım 3, 2 resimden 1. PlayStation Vita Case Separation: adım 3, 2 resimden 2.
    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

  4. PlayStation Vita Case Separation: adım 4, 3 resimden 1. PlayStation Vita Case Separation: adım 4, 3 resimden 2. PlayStation Vita Case Separation: adım 4, 3 resimden 3.
    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

  5. PlayStation Vita Case Separation: adım 5, 2 resimden 1. PlayStation Vita Case Separation: adım 5, 2 resimden 2.
    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

  6. PlayStation Vita Case Separation: adım 6, 1 resimden 1.
    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

  7. PlayStation Vita Case Separation: adım 7, 1 resimden 1.
    • Free the battery cable by gently prying up on the connection with a spudger.

  8. PlayStation Vita Case Separation: adım 8, 1 resimden 1.
    • Separate the front and rear cases.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Brittany McCrigler

Üyelik tarihi: 03/05/12

88.898 İtibar

131 adet Kılavuz yazıldı

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

16.576 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 302