Ana içeriğe geç

Pokewalker Battery Replacement

Neye ihtiyacın var

  1. Pokewalker Battery Replacement, Battery: adım 1, 1 resimden 1.
    • Locate the Screw on the Back of the Pokewalker.

  2. Pokewalker Battery Replacement: adım 2, 1 resimden 1.
    • Remove the Screw with a Phillips #0 Screwdriver

    • The screw is attached to the rear case with washers. don't worry about losing it.

  3. Pokewalker Battery Replacement: adım 3, 1 resimden 1.
    • Remove the Rear Cover from the Device

  4. Pokewalker Battery Replacement: adım 4, 1 resimden 1.
    • Use the flat end of a Spudger to Remove the Battery

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 farklı kişi bu kılavuzu tamamladı.

Winni Stuart

Üyelik tarihi: 04/13/14

417 İtibar

2 adet Kılavuz yazıldı

2 Yorum

The battery must be placed positive side facing up if I am correct.

I just dug my pokewalker out of my closet. Been years since it has been used. Putting in an effort to get it running again.

Thanks for the tutorial.

Jake Allen - Yanıt

I just got my Pokéwalker up and running again as well. Nintendo's stuff is always so well made.

signature -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 10

Son 7 gün: 85

Son 30 gün: 488

Her zaman: 25,118