Eşyalarını Tamir Et Topluluk Mağaza

Polar M400 Watch Wrist Strap Replacement

Giriş

This guide will teach someone how to take off a damaged or torn wrist strap on the Polar M400 and replace it with a new one. A damaged wrist strap could be due to excessive wear and tear or wearing it in wet conditions.

Neye ihtiyacın var

  1. Polar M400 Watch Wrist Strap Replacement, Wrist Strap: adım 1, 1 resimden 1.

    • Insert a standard paper clip into the holes on both sides of the watch that connect the watch's face with the wrist strap.

    Düzenle

  3. Polar M400 Watch Wrist Strap Replacement: adım 2, 2 resimden 1. Polar M400 Watch Wrist Strap Replacement: adım 2, 2 resimden 2.

    • Apply an upward pressure to the holes until the locking pins release.

    • Use precision tweezers to remove the pins that connect the face with the strap.

    Düzenle

  4. Polar M400 Watch Wrist Strap Replacement: adım 3, 1 resimden 1.

    • Once the pins are released, the old wrist strap should snap off.

    • Simply lock the new wrist strap into place.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Timothy Rocha

Üyelik tarihi: 09/28/17

392 İtibar

1 Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

University of Maine, Team S1-G3, Diaz Fall 2017 University of Maine, Team S1-G3, Diaz Fall 2017 üyesi

UMAINE-DIAZ-F17S1G3

4 Üyeler

7 adet Kılavuz yazıldı

2 Yorum

I am trying to do the same on my Polar v800 and I cannot remove the locking pins, they seem to be “stuck”, any idea how to loosen them?

Gustavo Fette - Yanıt

Polar won’t sell spare parts so where can I buy a replacement screen or a replacement front case for the M430?

Olivier Grand - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 15

Son 30 gün: 51

Her zaman: 9,426