Eşyalarını Tamir Et Topluluk Mağaza

Polaroid Cube Video Quality Switch Replacement

Giriş

This guide will walk you through the video quality switch on your Polaroid Cube. Make sure the device is completely powered off before disassembly, and that you have all of the required tools.

Neye ihtiyacın var

  1. Polaroid Cube Video Quality Switch Replacement, Battery: adım 1, 1 resimden 1.

    • Remove the SD card cover by twisting it using a Plastic Opening Tool

    Düzenle

  2. Polaroid Cube Video Quality Switch Replacement: adım 2, 1 resimden 1.

    • Use the Plastic Opening tool to pry off and remove the front cover.

    Düzenle

  3. Polaroid Cube Video Quality Switch Replacement: adım 3, 1 resimden 1.

    • Using a J00 head screwdriver, remove the four 3.27mm screws from the front of the camera near the lens.

    Düzenle

  4. Polaroid Cube Video Quality Switch Replacement: adım 4, 2 resimden 1. Polaroid Cube Video Quality Switch Replacement: adım 4, 2 resimden 2.

    • Use the Plastic Opening Tool to pry open the shell of the camera.

    • There are four latches, one at each corner, that you will need to detach.

    Düzenle

  5. Polaroid Cube Video Quality Switch Replacement: adım 5, 1 resimden 1.

    • Remove shell from top and bottom of camera.

    Düzenle

  7. Polaroid Cube Video Quality Switch Replacement: adım 6, 1 resimden 1.

    • Remove the rubber seal wrapped around the camera.

    Düzenle

  8. Polaroid Cube Video Quality Switch Replacement: adım 7, 2 resimden 1. Polaroid Cube Video Quality Switch Replacement: adım 7, 2 resimden 2.

    • Remove the tape wrapped around the battery.

    Düzenle

  9. Polaroid Cube Video Quality Switch Replacement: adım 8, 3 resimden 1. Polaroid Cube Video Quality Switch Replacement: adım 8, 3 resimden 2. Polaroid Cube Video Quality Switch Replacement: adım 8, 3 resimden 3.

    • Using a J00 head screwdriver, unscrew the four 3.46mm screws from the top and bottom circuit board.

    Düzenle

  10. Polaroid Cube Video Quality Switch Replacement: adım 9, 2 resimden 1. Polaroid Cube Video Quality Switch Replacement: adım 9, 2 resimden 2.

    • Use the plastic opening tool to remove the circuit board that the battery is connected to.

    Düzenle

  11. Polaroid Cube Video Quality Switch Replacement: adım 10, 1 resimden 1.

    • Gently remove the battery pin connector from the circuit board.

    Düzenle

  12. Polaroid Cube Video Quality Switch Replacement, Video Quality Switch: adım 11, 2 resimden 1. Polaroid Cube Video Quality Switch Replacement, Video Quality Switch: adım 11, 2 resimden 2.

    • Using a J00 head screwdriver, unscrew the 3.46mm screw that connects the top circuit board to the video quality switch board.

    Düzenle

  13. Polaroid Cube Video Quality Switch Replacement: adım 12, 1 resimden 1.

    • Remove the circuit board.

    Düzenle

  14. Polaroid Cube Video Quality Switch Replacement: adım 13, 2 resimden 1. Polaroid Cube Video Quality Switch Replacement: adım 13, 2 resimden 2.

    • Using a J00 head screwdriver, unscrew the two 3.46mm screws connecting the video quality switch to the case.

    • Remove and replace the broken video quality switch.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Grant Baldwin

Üyelik tarihi: 09/29/16

685 İtibar

2 adet Kılavuz yazıldı

Rozetler: 15

+12 tane daha rozet

Ekip

IUPUI, Team 3-2, Harley Fall 2016 IUPUI, Team 3-2, Harley Fall 2016 üyesi

IUPUI-HARLEY-F16S3G2

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 13

Her zaman: 870