Giriş

Taking off the back of this phone will allow you to look at or replace all of the pieces inside this device. This is a prerequisite guide for any other replacement you would like to accomplish with your SoundStation.

Parçalar

Hiçbir parçaya gerek yok.

Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.
  • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

  • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

Yorum Ekle

Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off! Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!
  • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Cali Nowak Credit

Üyelik tarihi: 02-09-2014

401 İtibar

4 adet Kılavuz yazıldı

Takım

Bir Yorum

thanks for this - the 7mm were under footpads so I couldn’t see them. cover now off, keyboard dried of coffee and working fine again!!

J M - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 8

Son 30 Gün: 18

Her zaman: 577