Eşyalarını Tamir Et Topluluk Mağaza

Portable Power Station Tool Mounts Replacement

Giriş

Follow this guide to replace the Tool Mounts on your FixHub Portable Power Station.

If you're looking to create your own mounts or accessories, check out the 3D model here.

Neye ihtiyacın var

  1. Portable Power Station Tool Mounts Replacement, Remove the tool mount screws: adım 1, 2 resimden 1. Portable Power Station Tool Mounts Replacement, Remove the tool mount screws: adım 1, 2 resimden 2.

    • Use a Phillips screwdriver to remove the two 6 mm‑long screws securing the tool mounts on either side of the power station.

    Düzenle

  3. Portable Power Station Tool Mounts Replacement, Remove the tool mounts: adım 2, 2 resimden 1. Portable Power Station Tool Mounts Replacement, Remove the tool mounts: adım 2, 2 resimden 2.

    • Use your fingers to pull the tool mounts off both sides of the power station.

    • The tool mounts are keyed. During reassembly, align the pins on the mounts with the holes in the enclosure.

    Düzenle
Sonuç

To install new tool mounts, follow these instructions in reverse order.

Repair didn't go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Yazar

3 tane daha katılımcı ile

Nick Schultz

Üyelik tarihi: 03/24/24

19.496 İtibar

114 adet Kılavuz yazıldı

Rozetler: 34

+31 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

120 Üyeler

19.665 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 29

Her zaman: 163