Eşyalarını Tamir Et Topluluk Mağaza

Porter-Cable 382 On/ Off Switch Replacement

Neye ihtiyacın var

  1. Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: adım 1, 2 resimden 1. Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: adım 1, 2 resimden 2.

    • First, locate the three screws on the top of the sander.

    • Using a screw driver with a size T20 star bit, unscrew the screws by turning them to the left.

    Düzenle

  3. Porter-Cable 382 On/ Off Switch Replacement: adım 2, 2 resimden 1. Porter-Cable 382 On/ Off Switch Replacement: adım 2, 2 resimden 2.

    • Locate your on off switch and in order to remove it you must slide it out of its slot.

    • This shouldnt require any special tools, just wiggle the switch up and out.

    • Make sure this is done carefully, the switch is attached to two wires that may break if they are pulled on too hard.

    Düzenle

  4. Porter-Cable 382 On/ Off Switch Replacement: adım 3, 1 resimden 1.

    • Using a spudger such as the one shown, carefully pry open the connectors as shown just enough to slide the prongs of the switch out.

    • Once both prongs are open, the on-off switch can be removed freely and replaced with a new switch.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Nick O'Sadcia

Üyelik tarihi: 03/11/16

421 İtibar

3 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

UMass Dartmouth, Team 8-7, Botvin Spring 2016 UMass Dartmouth, Team 8-7, Botvin Spring 2016 üyesi

UMASSD-BOTVIN-S16S8G7

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 8

Her zaman: 230