Ana içeriğe geç

Porter-Cable PCE211 Brush Replacement

Neye ihtiyacın var

  1. Porter-Cable PCE211 Brush Replacement, Rear Housing: adım 1, 2 resimden 1. Porter-Cable PCE211 Brush Replacement, Rear Housing: adım 1, 2 resimden 2.
    • Remove the four 6 mm screws using a Phillips #2 screwdriver.

    • The screws are tight so you will need to use a bit of arm strength.

  2. Porter-Cable PCE211 Brush Replacement: adım 2, 2 resimden 1. Porter-Cable PCE211 Brush Replacement: adım 2, 2 resimden 2.
    • Pull the rear housing off the back of the impact wrench.

    • Be careful when removing the rear case that loose parts don't get damaged.

  3. Porter-Cable PCE211 Brush Replacement, Brush: adım 3, 2 resimden 1. Porter-Cable PCE211 Brush Replacement, Brush: adım 3, 2 resimden 2.
    • Remove the brushes connected to the red and black cords.

    • They are not secured so they made drop out naturally.

  4. Porter-Cable PCE211 Brush Replacement: adım 4, 3 resimden 1. Porter-Cable PCE211 Brush Replacement: adım 4, 3 resimden 2. Porter-Cable PCE211 Brush Replacement: adım 4, 3 resimden 3.
    • Gently pull each brush off the corresponding cable to avoid damaging the cables.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Layla Berry

Üyelik tarihi: 09/19/22

678 İtibar

7 adet Kılavuz yazıldı

Ekip

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 17

Her zaman: 229