Eşyalarını Tamir Et Topluluk Mağaza

Porter-Cable PCE211 Grip Replacement

Giriş

If you need to replace the grip of your Porter-Cable PCE211 impact wrench, follow this guide. You'll need to remove the grip to access the switch as well.

Be sure to turn off the device and unplug from the power source prior to beginning this repair.

Neye ihtiyacın var

  1. Porter-Cable PCE211 Grip Replacement, Gearcase: adım 1, 2 resimden 1. Porter-Cable PCE211 Grip Replacement, Gearcase: adım 1, 2 resimden 2.

    • Using the Hex Security SAE 7/32", remove the four 10 mm socket screws at the base of the gearcase.

    Düzenle

  2. Porter-Cable PCE211 Grip Replacement: adım 2, 3 resimden 1. Porter-Cable PCE211 Grip Replacement: adım 2, 3 resimden 2. Porter-Cable PCE211 Grip Replacement: adım 2, 3 resimden 3.

    • Grip the body of the impact wrench with one hand and the gearcase in the other and firmly pull to remove it.

    • Be careful about any loose parts when removing the head.

    Düzenle

  3. Porter-Cable PCE211 Grip Replacement, Rear Housing: adım 3, 2 resimden 1. Porter-Cable PCE211 Grip Replacement, Rear Housing: adım 3, 2 resimden 2.

    • Remove the four 6 mm screws using a Phillips #2 screwdriver.

    • The screws are tight so you will need to use a bit of arm strength.

    Düzenle

  5. Porter-Cable PCE211 Grip Replacement: adım 4, 2 resimden 1. Porter-Cable PCE211 Grip Replacement: adım 4, 2 resimden 2.

    • Pull the rear housing off the back of the impact wrench.

    • Be careful when removing the rear case that loose parts don't get damaged.

    Düzenle

  6. Porter-Cable PCE211 Grip Replacement, Anvil: adım 5, 3 resimden 1. Porter-Cable PCE211 Grip Replacement, Anvil: adım 5, 3 resimden 2. Porter-Cable PCE211 Grip Replacement, Anvil: adım 5, 3 resimden 3.

    • Firmly pull the to remove drill bit holder also known as the anvil.

    • Before replacing the anvil, lubricate the base for the best performance.

    Düzenle

  7. Porter-Cable PCE211 Grip Replacement, Motor: adım 6, 3 resimden 1. Porter-Cable PCE211 Grip Replacement, Motor: adım 6, 3 resimden 2. Porter-Cable PCE211 Grip Replacement, Motor: adım 6, 3 resimden 3.

    • This section tends to get messy so it would be best to have a paper towel or microfiber towel handy.

    • Pull the motor out with your hands.

    Düzenle

  8. Porter-Cable PCE211 Grip Replacement: adım 7, 3 resimden 1. Porter-Cable PCE211 Grip Replacement: adım 7, 3 resimden 2. Porter-Cable PCE211 Grip Replacement: adım 7, 3 resimden 3.

    • Wipe out the old grease with a towel. Use the appropriate motor grease for electric tools to lubricate the top area, base of the motor, and the space the motor sits.

    Düzenle

  9. Porter-Cable PCE211 Grip Replacement, Grip: adım 8, 2 resimden 1. Porter-Cable PCE211 Grip Replacement, Grip: adım 8, 2 resimden 2.

    • Using the Phillips #2 screwdriver, remove the three 8 mm screws from the grip of the impact wrench.

    Düzenle

  10. Porter-Cable PCE211 Grip Replacement: adım 9, 2 resimden 1. Porter-Cable PCE211 Grip Replacement: adım 9, 2 resimden 2.

    • Pull the grip from the body of the impact wrench.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Layla Berry

Üyelik tarihi: 09/19/22

678 İtibar

7 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Austin Community College, Team 13-1, Watkins Fall 2022 Austin Community College, Team 13-1, Watkins Fall 2022 üyesi

AUSTINCC-WATKINS-F22S13G1

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 93