Giriş

This is meant to be a private prereq guide.

Parçalar

Hiçbir parçaya gerek yok.

  1. The hard drive is located in the back right corner of the case.
    • The hard drive is located in the back right corner of the case.

  2. Remove the flat ribbon cable by pulling with substantial force.
    • Remove the flat ribbon cable by pulling with substantial force.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remove the screw holding the hard drive to the computer.
    • Remove the screw holding the hard drive to the computer.

  5. Pull the drive up and out of the computer.
    • Pull the drive up and out of the computer.

  6. Remove the multicolored cable by grasping the plastic connector on either side and pulling with substantial force.
    • Remove the multicolored cable by grasping the plastic connector on either side and pulling with substantial force.

Sonuç

To reassemble your device, follow these instructions in reverse order.

10 başka kişi bu kılavuzu tamamladı.

Ryan Bylard

Üyelik tarihi: 20-01-2010

1.275 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 14-41, Regan Winter 2010 Cal Poly, Team 14-41, Regan Winter 2010 üyesi

CPSU-REGAN-W10S14G41

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 5

Her zaman: 7,197