Giriş

Use this guide to replace the front fan assembly on your Power Mac G5.

Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.
  • To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.

  • To avoid being burned, wait at least 10 minutes to allow the computer's internal components to cool.

Yorum Ekle

Remove all the cables, including the power cables before opening the unit.
  • Remove all the cables, including the power cables before opening the unit.

Yorum Ekle

Lift the tab to unlock the side panel. The panel should fall out. If the panel does not fall out by itself pull a little from the edges.
  • Lift the tab to unlock the side panel.

  • The panel should fall out. If the panel does not fall out by itself pull a little from the edges.

Yorum Ekle

Remove the air deflector (the clear plastic cover) by pulling on the handle. Remove the air deflector (the clear plastic cover) by pulling on the handle. Remove the air deflector (the clear plastic cover) by pulling on the handle.
  • Remove the air deflector (the clear plastic cover) by pulling on the handle.

Yorum Ekle

Locate the front fan assembly.
  • Locate the front fan assembly.

Yorum Ekle

Pull the fan assembly out; it should slide out easily.
  • Pull the fan assembly out; it should slide out easily.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

23 başka kişi bu kılavuzu tamamladı.

Adam

Üyelik tarihi: 22-01-2010

694 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 5-8, Forte Winter 2010 Cal Poly, Team 5-8, Forte Winter 2010 üyesi

CPSU-FORTE-W10S5G8

7 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 10

Son 30 Gün: 48

Her zaman: 16,938