Giriş

These steps will show you how to install the top left cooling fan unit.

Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

  1. To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.
    • To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.

    • To avoid being burned, wait at least 10 minutes to allow the computer's internal components to cool.

    Yorum Ekle

  2. Remove all the cables, including the power cables before opening the unit.
    • Remove all the cables, including the power cables before opening the unit.

    Yorum Ekle

    • Lift the tab to unlock the side panel.

    • The panel should fall out. If the panel does not fall out by itself pull a little from the edges.

    Yorum Ekle

    • Remove the air deflector (the clear plastic cover) by pulling on the handle.

    Yorum Ekle

    • Locate the top left cooling fan unit.

    Yorum Ekle

    • Pull the fan straight out from its slot. You will need to remove two cables from the motherboard.

      • It may be easier to reach the cables if you remove the PCI guide (next to the fan unit) first.

    Yorum Ekle

    • After pulling out the fan unit, the area should look like this.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

19 başka kişi bu kılavuzu tamamladı.

Salvador Aguilar

Üyelik tarihi: 21-01-2010

2.361 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 5-8, Forte Winter 2010 Cal Poly, Team 5-8, Forte Winter 2010 üyesi

CPSU-FORTE-W10S5G8

7 Üyeler

11 adet Kılavuz yazıldı

Bir Yorum

Actually you do need to remove the plastic air deflector, as the fan in question is behind it.

Tim downing - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 7

Son 30 Gün: 35

Her zaman: 17,233