Giriş

My RAM configuration may differ from yours, but the process is exactly the same.

Aletler

Hiçbir alete gerek yok.

Parçalar

  1. Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

      • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    Yorum Ekle

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Push the white tabs next to where your RAM is located away form the RAM chip itself.
    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

      • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

    Yorum Ekle

    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

Üyelik tarihi: 28-08-2018

14.632 İtibar

22 adet Kılavuz yazıldı

Takım

NIWOTech NIWOTech üyesi

Community

0 Üyeler

0 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 4

Son 30 Gün: 27

Her zaman: 59