1. Remove the Ni-Cad battery from the PowerBook 180.
    • Remove the Ni-Cad battery from the PowerBook 180.

    • Slide the arrows toward the front of the computer until the battery can slide out.

    Yorum Ekle

  2. Removing the screws securing the bottom plate from the PowerBook 180.
    • Removing the screws securing the bottom plate from the PowerBook 180.

    • There are 5 Torx T8 screws, 4 of which are located on the bottom and 1 on the back above the modem port.

    Yorum Ekle

    • Your computer should look like the two pictures after the bottom plate is removed.

    Yorum Ekle

    • Locate the modem board, which is next to the DC-in port.

    • There are two Torx T8 screws marked in red in the pictures. Remove these screws and pull up on the modem board to remove.

    • To reassemble your PowerBook, follow these instructions in reverse.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Jack Byrnes

Üyelik tarihi: 17-10-2010

1.160 İtibar

2 adet Kılavuz yazıldı

Takım

Master Techs Master Techs üyesi

Community

278 Üyeler

755 adet Kılavuz yazıldı

Bir Yorum

Great guide. Worked for me of the Powerbook 140. Thanks!

Jack - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 987