Ana içeriğe geç

Giriş

Small metal finger located beneath the memory door.

Parçalar

Hiçbir parça belirtilmedi.

  1. Use a coin to turn the battery locking screw 90 degrees to the right.
    • Use a coin to turn the battery locking screw 90 degrees to the right.

    • Lift the battery out of the computer.

  2. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. Remove the four Phillips screws from the memory door.
    • Remove the four Phillips screws from the memory door.

    • Slide the memory door away from the memory compartment.

  4. Remove the long black Phillips screw next to the memory card.
    • Remove the long black Phillips screw next to the memory card.

    • Remove the small EMI finger beneath the black screw.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Ekli Belgeler

iRobot

Üyelik tarihi: 24-09-2009

1 İtibar

624 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 3

Her zaman: 5,769