Eşyalarını Tamir Et Topluluk Mağaza

PowerBook G4 Titanium Onyx Lower Case Replacement

Giriş

The bottom case slides off easily after removing a few T8 Torx screws.

Neye ihtiyacın var

    • Turn the G4 over.

    • Remove the eight T8 Torx screws from the lower case.

    Düzenle

  3. PowerBook G4 Titanium Onyx Lower Case Replacement: adım 2, 1 resimden 1.

    • Using your thumbs, slide the lower case away from you.

    • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

    Düzenle

  4. PowerBook G4 Titanium Onyx Lower Case Replacement: adım 3, 1 resimden 1.

    • Your laptop should look approximately like this.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Ekli Belgeler

Yazar

2 tane daha katılımcı ile

iRobot

Üyelik tarihi: 09/24/09

1 İtibar

636 adet Kılavuz yazıldı

Rozetler: 36

+33 tane daha rozet

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 5

Her zaman: 4,098