Eşyalarını Tamir Et Topluluk Mağaza

PowerLead Puto PLD003 Zoom Button Replacement

Giriş

This guide shows how to remove the side panel from the camera, how to remove the back panel, and how to replace the zoom button.

Neye ihtiyacın var

  1. PowerLead Puto PLD003 Zoom Button Replacement, Side Panel: adım 1, 1 resimden 1.

    • Slide the battery eject button open to release the battery door.

    Düzenle

  2. PowerLead Puto PLD003 Zoom Button Replacement: adım 2, 1 resimden 1.

    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

    Düzenle

  3. PowerLead Puto PLD003 Zoom Button Replacement: adım 3, 1 resimden 1.

    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

    Düzenle

  4. PowerLead Puto PLD003 Zoom Button Replacement: adım 4, 1 resimden 1.

    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

    Düzenle

  5. PowerLead Puto PLD003 Zoom Button Replacement, Zoom Button: adım 5, 2 resimden 1. PowerLead Puto PLD003 Zoom Button Replacement, Zoom Button: adım 5, 2 resimden 2.

    • Remove the 4 mm Phillips #1 screws holding the weight.

    • Remove the weight.

    Düzenle

  7. PowerLead Puto PLD003 Zoom Button Replacement: adım 6, 1 resimden 1.

    • Remove the two 4 mm Phillips #1 screws holding the back panel in place.

    Düzenle

  8. PowerLead Puto PLD003 Zoom Button Replacement: adım 7, 1 resimden 1.

    • Apply pressure to the back panel, pulling away from the camera to remove it.

    Düzenle

  9. PowerLead Puto PLD003 Zoom Button Replacement: adım 8, 2 resimden 1. PowerLead Puto PLD003 Zoom Button Replacement: adım 8, 2 resimden 2.

    • Remove the final 4 mm Phillips #1 screw holding the screen in place.

    • This screw is very small and hard to see.

    Düzenle

  10. PowerLead Puto PLD003 Zoom Button Replacement: adım 9, 1 resimden 1.

    • Carefully apply pressure away from the camera to the screen to detach it from the body.

    • The white cord should still be connected to the body.

    • OPTIONAL: Remove the screen to make accessing the zoom button easier.

    Düzenle

  11. PowerLead Puto PLD003 Zoom Button Replacement: adım 10, 1 resimden 1.

    • Remove the three 4 mm Phillips #1 screws holding the top panel in place.

    Düzenle

  12. PowerLead Puto PLD003 Zoom Button Replacement: adım 11, 2 resimden 1. PowerLead Puto PLD003 Zoom Button Replacement: adım 11, 2 resimden 2.

    • Push upward on the top panel to remove it from the body of the camera.

    Düzenle

  13. PowerLead Puto PLD003 Zoom Button Replacement: adım 12, 2 resimden 1. PowerLead Puto PLD003 Zoom Button Replacement: adım 12, 2 resimden 2.

    • Remove the two 4 mm Phillips #1 screws holding the circuit board in place.

    • Do not remove the silver screws.

    Düzenle

  14. PowerLead Puto PLD003 Zoom Button Replacement: adım 13, 1 resimden 1.

    • Lift the circuit board out of the plastic casing.

    • Gently pull on the zoom button to remove it from the circuit board.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 160