Ana içeriğe geç

Giriş

If the speaker has stopped working, and you replaced the batteries, then this one way you can fix the speaker. There are no hazards or special requirements for this guide.

Parçalar

Hiçbir parça belirtilmedi.

  1. Use a Phillips #0 screwdriver to remove every screw on the back of the wand. Use a Phillips #0 screwdriver to remove every screw on the back of the wand.
    • Use a Phillips #0 screwdriver to remove every screw on the back of the wand.

  2. Next, gently open the wand.
    • Next, gently open the wand.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Locate the speaker at the bottom of the wand, and take it out.
    • Locate the speaker at the bottom of the wand, and take it out.

  5. Desolder the speaker wires from the terminals on the speaker.
    • Desolder the speaker wires from the terminals on the speaker.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Samantha

Üyelik tarihi: 01-06-2016

131 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 4

Son 30 Gün: 11

Her zaman: 269